Scraaatch™

Scraaatch™ is our range of big, bold & colourful cat scratchers that have a clean aesthetic & are very cat friendly in terms of practical use - they won't move, topple or come apart when your cat is doing its thing

Standard Specification

There are four designs available all with interchangeable parts - Pipe is extra long for a really big horizontal scratch, Stand Pipe is made for a tall vertical scratch, Wall Pipe can be set-up for an extra tall off the ground scratch & Stool is great for scratching & sitting (cats & humans).

They are available in a choice of nine standard lacquered paint finishes plus 200+ custom colours - they’re wound in superior quality sisal rope to give your cat something very special to get their claws into.

Pipe

Designed to give your cat two or four footed scratching - the body is filled with sand to act as ballast so lying next to the unit, straddling it or standing on it to scratch are all options.

Stand Pipe

This design is an upright version of the Pipe that is fixed to a base - it's probably the scratcher that most cats will be familiar with but in a taller design & because it’s also filled with sand to act as ballast it’s comes without any of the unwanted wobbling or toppling over.

Wall Pipe

This design can be wall mounted at any height to give your cat that normally out of reach stretch - this unit does not need ballast, it’s very easy to install & comes with fixings & bits.

Stool

A scratcher designed for an upright seated scratch or a four footed scratch whilst laying down between the legs - it looks like a piece of furniture & can be used as such with or without ballast. 

Custom Colours

We use Molotow™ Premium paints on our Scraaatch™ products - if you can’t find a colour you like from our standard finishes you can pick a custom colour from their 251+ Molotow Premium range.

Dimensions

Pipe measures 830mm long, 120mm wide, 140mm high & weighs 2kg.

Stand Pipe measures 830mm high, 432mm in diameter & weighs 5.2kg.

Wall Pipe measures 830mm high, 120mm wide, 135mm deep & weighs 2kg.

Stool measures 480mm square, 480mm tall & weighs 10kg.

Build Your Own & Spares

To give your cat even more Scraaatch™ options there are various accessories & spares available to purchase online - you can specify different end cap colours, turn a Pipe into Wall Pipe or Stand Pipe & vice versa as well as purchasing replacement sisal sections as & when they become worn.

We recommend regularly turning & rotating the sisal sections of your Scraaatch™ unit to help prolong it’s life as you cat will probably have a favourite spot that will become worn quickly.

Assembly

Pipe, Stand Pipe & Stool can be assembled by hand but need to be filled with dry sand to act as ballast - Wall Pipe doesn’t need ballast but you will need a drill & medium sized cross headed screwdriver to install these units.

Please see our Installation page for more information.

Online Shop

You can purchase your Scraaatch™ from our online shop & orders are fulfilled within 2-4 weeks - shipping is calculated at checkout & please get in touch if your country isn’t listed & we can provide a Delivery Quote.

Bespoke Orders

Our products are made by hand in our London studio so we can produce bespoke orders - please use the order form below if you have something special in mind.